Main content

Designing and Engineering a New Biocomposite Material from Distillers’ Grains and Bioplastics

Show simple item record

dc.contributor.advisor Misra, Manjusri
dc.contributor.advisor Mohanty, Amar K.
dc.contributor.author Zarrinbakhsh, Nima
dc.date.accessioned 2014-05-13T18:11:50Z
dc.date.available 2014-05-13T18:11:50Z
dc.date.copyright 2014-05
dc.date.created 2014-05-05
dc.date.issued 2014-05-13
dc.identifier.uri http://hdl.handle.net/10214/8122
dc.description.abstract In recent years, the expansion of the corn ethanol industry has generated surplus amounts of solid coproducts mainly in the form of dried distillers’ grains with solubles (DDGS). In order to help economic viability and sustainability of the industry, research is being conducted to find new, more profitable applications for this coproduct besides its traditional usage as animal feed. In the present project, the capabilities of DDGS are evaluated for using as a filler and/or reinforcement in producing green biocomposites with a number of bioplastics. The bioplastics used here are partially originated from renewable resources with end-life biodegradability in compost conditions. The focus of this research is to design and engineer material formulations with balanced performance. Extrusion and injection molding techniques have been employed to produce the biocomposites and the performance of the produced materials was evaluated through several mechanical, thermomechanical and physical properties. The discussions are augmented with thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). The results are conclusive in that DDGS is a better filler for polymeric biocomposites when it undergoes a water treatment before processing with polymer melts. The treated DDGS shows a thermal degradation rate four times less than as-received DDGS at 180 °C, the processing temperature of the composite materials. The DDGS biocomposites are produced with a range of biodegradable plastics and the effect of a polymeric isocyanate compatibilizer is evaluated. The compatibilizer improves the interfacial adhesion between DDGS particles and the polymeric matrix, as evidenced by SEM, and thus, enhances the strength and modulus; however, reduces the impact strength. A high-impact DDGS biocomposite is produced using a combination of compatibilizer and lubricant as additives. The optimization of the material’s formulation is approached statistically based on a full factorial design of experiment (DOE) for additive amounts, followed by a response surface methodology (RSM) for mechanical and physical properties. With this approach, biocomposites of DDGS and bioplastics are successfully designed which exhibit acceptable performance such as tensile strength of more than 20 MPa, flexural modulus of more than 1 GPa, impact strength of more than 100 J/m and melt flow index of more than 5 g/10min. en_US
dc.language.iso en en_US
dc.rights Attribution-NonCommercial-NoDerivs 2.5 Canada *
dc.rights.uri http://creativecommons.org/licenses/by-nc-nd/2.5/ca/ *
dc.subject Materials Science and Engineering en_US
dc.subject Biocomposite en_US
dc.subject Corn ethanol coproduct en_US
dc.subject Distillers' grains en_US
dc.subject Dried distillers' grains with solubles (DDGS) en_US
dc.subject Mechanical properties en_US
dc.subject Thermo-mechanical properties en_US
dc.subject Characterization methods en_US
dc.subject Scanning electron microscopy (SEM) en_US
dc.subject Design of experiment (DOE) en_US
dc.subject Response surface methodology (RSM) en_US
dc.subject Biofuel sustainability en_US
dc.subject Fourier transform infrared spectroscopy (FTIR) en_US
dc.subject Thermogravimetric analysis (TGA) en_US
dc.subject Compatibilizer en_US
dc.subject Formulation optimization en_US
dc.subject Dynamic mechanical analysis (DMA) en_US
dc.subject Biodegradable en_US
dc.subject Melt flow index (MFI) en_US
dc.subject Melt extrusion en_US
dc.subject Injection molding en_US
dc.title Designing and Engineering a New Biocomposite Material from Distillers’ Grains and Bioplastics en_US
dc.type Thesis en_US
dc.degree.programme Engineering en_US
dc.degree.name Doctor of Philosophy en_US
dc.degree.department School of Engineering en_US
dc.rights.license All items in the Atrium are protected by copyright with all rights reserved unless otherwise indicated.


Files in this item

Files Size Format View
Zarrinbakhsh_Nima_201405_PhD.pdf 8.450Mb PDF View/Open

This item appears in the following Collection(s)

Show simple item record

Attribution-NonCommercial-NoDerivs 2.5 Canada Except where otherwise noted, this item's license is described as Attribution-NonCommercial-NoDerivs 2.5 Canada