Main content

Boric Acid Chemistry under Pressurized Water Reactor Coolant Conditions by Flow AC Conductivity

Show simple item record

dc.contributor.advisor Tremaine, Peter R.
dc.contributor.author Ferguson, Jane Patricia
dc.date.accessioned 2018-09-28T15:15:50Z
dc.date.available 2019-09-17T05:00:26Z
dc.date.copyright 2018-09
dc.date.created 2018-09-17
dc.date.issued 2018-09-28
dc.identifier.uri http://hdl.handle.net/10214/14348
dc.description.abstract A state-of-the-art high precision flow-through conductance instrument has been used to measure very accurate transport properties and equilibrium constants for aqueous borate and polyborate species from 25 to 350 °C. These results provide a significant improvement to the database that has been used to adjust mass transport thermodynamic models used for chemistry control in Pressurized Water Nuclear Reactors (PWRs). Frequency dependent molar conductivities were measured for over 500 aqueous solutions of boric acid, sodium borate, potassium borate, and lithium borate to yield (i) limiting conductivities of borate, diborate, and triborate (ii) ionization constants of boric acid, (iii) diborate and triborate formation constants, and (iv) sodium borate, potassium borate, and lithium borate ion-pair formation constants using the Turq-Blum-Bernard-Kunz (“TBBK”) theoretical model. These results are the first reported accurate (poly)borate limiting conductivities above 50 °C and only the second high temperature study to report polyborate formation constants, the first lithium borate ion-pair formation constants reported above 45 °C, and the first accurate boric acid ionization constants reported above 290 °C. The significance of this work lies in providing the new thermodynamic and transport properties measured under extreme conditions which are necessary (i) to develop our basic theoretical understanding of aqueous systems and (ii) to model the crevice chemistry of fuel deposits in PWRs under the “hideout” conditions that can lead to crud-induced power shifts. The results are expected to form the basis for a new database for borate species in the EPRI software MULTEQ, used to model PWR primary coolant chemistry. en_US
dc.description.sponsorship Natural Sciences and Engineering Research Council (NSERC), Electric Power Research Institute (EPRI) en_US
dc.language.iso en en_US
dc.subject Boric acid en_US
dc.subject Conductivity en_US
dc.subject Equilibrium constant en_US
dc.subject Ion-pairing en_US
dc.subject Hydrothermal solution en_US
dc.subject Potassium borate en_US
dc.subject Sodium borate en_US
dc.subject TBBK model en_US
dc.subject Water en_US
dc.subject High temperature water en_US
dc.subject Lithium hydroxide en_US
dc.subject Polyborate en_US
dc.subject Diborate en_US
dc.subject Triborate en_US
dc.subject pH control en_US
dc.subject Pressurized Water Reactor en_US
dc.subject PWR en_US
dc.title Boric Acid Chemistry under Pressurized Water Reactor Coolant Conditions by Flow AC Conductivity en_US
dc.type Thesis en_US
dc.degree.programme Chemistry en_US
dc.degree.name Doctor of Philosophy en_US
dc.degree.department Department of Chemistry en_US
dc.rights.license All items in the Atrium are protected by copyright with all rights reserved unless otherwise indicated.


Files in this item

Files Size Format View
Ferguson_Jane_201809_PhD.pdf 5.262Mb PDF View/Open

This item appears in the following Collection(s)

Show simple item record